Below is a group product of Car Maintenance.
Product List
Optical axis offset
Vertical direction:
Up 40cm/10m
Below 56cm/10m
Horizontal direction: Left ...
[Last Updated: 2009-11-10]
1. High-Strength galvanized drum and wear-resistant strength.
2. Drum through dynamic balance testing, ...
[Last Updated: 2009-11-10]
1.High-Strength galvanized drum and wear-resistant strength.
2.Drum through dynamic balance testing, ...
[Last Updated: 2009-11-10]
1. Main measure axle load, slip, brake performance. Domestic well-known brands sensor, measurement ...
[Last Updated: 2009-11-10]
Tank Length:660mm
Tank Width:70mm
Tank Height:400mm
Working Bench Height:900mm
Working ...
[Last Updated: 2009-11-10]
1. High-power motor, ball bearing structure, long life;
2. Electronic speed control module to ensure that ...
[Last Updated: 2009-11-10]
Standard model with 0.6L plastic paint can, nickel-plated frame, stainless steel needle and nozzle gun. ...
[Last Updated: 2009-11-10]
Power: 1pH 220V 50Hz
Rated Power: 3KW
Height Adjustment: 0.15-2.1M
"Time Adjust; 1-15min
Warm-up: ...
[Last Updated: 2009-11-10]
Automatic heating, automatic shutdown timer
Automatic thermostat spray
Automatic low-voltage ...
[Last Updated: 2009-11-10]
1.Automatically with layers in same layout pipeline
2.With bilateral steel ball bearings,
3. steel ...
[Last Updated: 2009-11-10]
Unique dual-circuit design, waste oil does not pollute the new oil; the oil cleaning and replace rate was ...
[Last Updated: 2009-11-10]
1. Special function: Automatically with layers in same layout pipeline
2. With bilateral steel ball ...
[Last Updated: 2009-11-10]
Single person can operate, spiral under pressure, anti- the hydraulic oil, as well as stuck design.
[Last Updated: 2009-11-10]
Max Lift Weight:0.5t
Min Height:870mm
Max Height:1800mm
Weight:91kg
Dimension:780*730*910
[Last Updated: 2009-11-10]
Max Lift Weight:2MT
Min Height:330mm
Max Height:2560mm
Weight:55kg
Packing Dimension: 136*83*18MM ...
[Last Updated: 2009-11-10]
Working Pressure:6-8bar
Output Rate: 50:1
Tube Length: 2.5m
Output Pressure: 500g/min
Tank ...
[Last Updated: 2009-11-10]
Power Output: 1-380v,50Hz,
suitable for 12v-24v small and medium-size car charge-assisted ...
[Last Updated: 2009-11-10]
1. Working pressure: 1-2.5bar
2. Weight: 18.5kg
3. Capacity: 24L
4. Maximum pressure of the safety ...
[Last Updated: 2009-11-10]
DT-800R (Electric) Automatic gearbox oil replacement cleaning machine parameters
1. Power: 0.18 KW
2. ...
[Last Updated: 2009-11-10]
The latest products, can measure the automotives of Asia, Europe, the Americas, most of the new car, both ...
[Last Updated: 2009-11-10]
1. Detect 6 injector simultaneously working conditions in same time.
2. Speed range 0-9950rpm step: ...
[Last Updated: 2009-11-10]
Max weight: 65kg
Power: 0.2kw
Power Supply: 220V
Balancing Precision: +-1g
Balancing Speed: ...
[Last Updated: 2009-11-10]
Power: 0.75kw 3phase or 1.1kw 1 phase
Power supply: 220v/380v
Max tire diameter: 41"
Max tire width: ...
[Last Updated: 2009-11-10]
1. Foldaway design. Save space.
2. Imported hydraulic, pneumatic and electrical components, equipment ...
[Last Updated: 2009-11-10]
1.5mm GB standard column plate;
2. Oil slider lifetime warranty; Double insurance let slip safety device, ...
[Last Updated: 2009-11-10]
1. Working Table Size: 270x280mm
2. Base Working Surface Size: 254x237mm
3. Total Hight 1230mm
4. Motor ...
[Last Updated: 2009-11-10]
1. Power supply 220V
2. Power frequency: 50Hz
3. Wheel Size: 355*3*25MM
4. Input power: 1800W
5. ...
[Last Updated: 2009-11-10]
Jack :20T
It most be suitable for automotive bearings assembly and dis-assembly.
[Last Updated: 2009-11-10]